Tennadyne, L.L.C.

We are extremely happy to announce that TENNADYNE is now a full line Dealer of ROHN, RADIAN, and NELLO products. Whether your communication needs require a guyed tower, a self supporting tower, a wall mount or a unique custom mounting solution, contact us for a quote.

ROHN BX TOWER

BX Tower is a X Brace design for strength. It's braces are riveted on center as well as on the ends. It is greater width and weight at bottom. It is beaded channel leg for added strength. These are all steel. It is pre-galvanized for added life. Rotators easily installed. Three steps included on one face of one top section. Sections nest inside each other for compact

BX	HBX	HDBX
Standard Basic Tower Needs	Heavy Duty For Heavier Capacity	Extra Heavy Duty Our Heaviest BX Tower
Maximum height 64'	Maximum height 56'	Maximum height 48'
Can be used with Concrete Base Stubs	Can be used with Concrete Base Stubs	Can be used with Concrete Base Stubs
Available in heights of 24' to 64' in 8' increments	Available in heights of 24' to 56' in 8' increments	Available in heights of 24' to 48' in 8' increments
Up to 6 square feet antenna capacity	Up to 12 square feet antenna capacity	Up to 20 square feet antenna capacity
Top of tower is a 8-1/8" triangle	Top of tower is a 10-3/16" triangle	Top of tower is a 12-3/4" triangle
Includes 8' mast (M8)	Mast not included	Mast not included
Always has #1 as a top section	Always has #2 as a top section	Always has #3 as a top section

ROHN / RADIAN / NELLO 25G Tower

The 25G is a 12 inch face triangular design tower using 1-1/4 inch tube steel legs and continuous 5/16 inch steel rod bracing in the ROHN Zig-Zag pattern. Each section is joined to the next with a swaged steel double bolted connection for extra strength. The tower is completely hot dip galvanized after fabrication and is available in 10 foot or UPS shippable 7 foot sections. Nuts and bolts come packed inside tower legs.

ROHN / RADIAN / NELLO 45G Tower

The 45G is an 18 inch face triangular design tower using 1-1/4 inch tube steel legs and continuous 7/16 inch steel rod bracing in the ROHN Zig-Zag pattern. Each section is joined to the next with a swaged steel double bolted connection for extra strength. The tower is completely hot dip galvanized after fabrication and is available in 10 foot sections, with all required hardware for installation.

ROHN / RADIAN / NELLO 55G Tower

The 55G is an 18 inch face triangular design tower using 1-1/2 inch tube steel legs and continuous 7/16 inch steel rod bracing in the ROHN Zig-Zag pattern. Each section is joined to the next with a swaged steel double bolted connection for extra strength. The tower is completely hot dip galvanized after fabrication and is available in 10 foot sections, with all required hardware for installation.

ROHN / RADIAN / NELLO 65G Tower

The 65G feature 2" outside diameter high strength steel side rails and is built using a 26-1/4" equilateral triangle design. The Zig-Zag® cross bracing is formed from a continuous 5/8" solid steel rod electrically welded every 22" on the side rails.

ROHN / RADIAN / NELLO Self Supporting Towers

The SSV tower is a self supporting, triangular structure with tube legs and angle steel cross bracing. The tower uses tapered sections, and face widths will vary according to height and load capacity required. The knock-down design allows efficient shipping and quick on-site assembly. The SSV is available both as a custom designed structure and in generic predesigned "catalog" configurations.

Please click here to send a quote request.